Segway SGW500F-A7 - Drain the Engine Oil

98
MAINTENANCE,STORAGE AND TRANSPORTATION
DRAIN THE ENGINE OIL
1
2
3
4
1
Bolt
2
Filter inspection cover
3
Oil drain plug
4
Gasket
The engine oil drain plug is located under the maintenance cover
plate of the frame floor at the bottom of the vehicle.
1. Put the vehicle on the flat level surface.
2. Start the engine, let it warm up at idle for 2 to 3 minutes.
3. Turn off the engine.
4. Remove the fixing screws of the filter inspection cover and
open the filter inspection cover.
5. Remove the oil drain plug
3
and gasket, until the waste
engine oil drains out completely.
NOTICE
Hot oil may burn the skin. Do not let the oil contact skin.
6. Put a new sealing washer onto the drain plug and reinstall the
drain plug.
Torque specifications
：
Torque Oil drain plug
：
16-20N.m(11.8-14.8ft·lb)