124
MAINTENANCE,STORAGE AND TRANSPORTATION
HIGH BEAM ADJUSTMENT
The headlight beam can be adjusted slightly up/down. Use the
following procedure to make adjustments.
!
CAUTION
The following pictures are for reference only. Your model may be
slightly different.
It is best to let Segway Powersports dealers adjust if conditions
permit.
1. Place the vehicle on a horizontal ground with a headlight
position of about 10M.
1
2
2. Measure the distance from the floor to the center of the
headlights and mark the walls at the same height.
3. Start the engine. Convert headlight switch to high beam.
4. Watch the headlights aim at the wall. The strongest part of the
headlight beam should be 2 inches. Measurement on the seat
includes weight of the driver.
To Next Page
Loading...
