52
VEHICLE DEVICE
CUSHION
Cushion removal
The cushion is a snap-on quick release part.
1. Hook the cushion hook with your fingers and move it upward.
2. Lift the cushion upward after it springs open.
3. Remove the cushion.
NOTICE
There is a cable connection under the cushion, please be careful
when removing the cushion and moving it upwards.
CUSHION INSTALLATION
Insert the lug on the front of the cushion into the center of the
U-bracket welded to the frame, push the cushion forward firmly
and press the cushion down to lock it.
!
CAUTION
After the cushion is installed, double-check that the installation
is secure.
To Next Page
Loading...
Need help?
General
