100
MAINTENANCE,STORAGE AND TRANSPORTATION
OIL FILTER CHANGE
This procedure requires mechanical skill and professional tools
such as a torque wrench as well as a means for disposing of the
drained fluid. If you do not have the skills or the tools, see your
dealer.
The oil filter is located behind the maintenance cover of the frame
bottom plate.
1. Remove the screw of the frame bottom maintenance cover
plate, remove the frame bottom maintenance cover plate, the
oil filter is located here, put the towel under the oil filter.
2. Remove the oil filter with the oil filter wrench.
3. Replace the new O-ring, lubricate it with lubricating oil and
install it on the new filter.
4. Tighten the new filter to the specified torque.
Rotate clockwise to install the new filter until the filter gasket
touches the sealing surface. Tighten the can.
NOTICE
Change the oil filter every time you change the oil.
To Next Page
Loading...
