Segway SGW500F-A7 - Left Handle Switch

30
VEHICLE DEVICE
LEFT HANDLE SWITCH
6
4
1
5
2
3
1
Engine start/stop switch
“ ”
：
Engine power on
“ ”
：
Engine stop
“ ”
：
Engine start
Start the engine
1. Turn the ignition key to the "ON" position.
2. Tighten the foot brake.
3. Press the engine start-stop switch to the " " position
and release it, the engine will start, and the switch will
automatically return to the " " position.
Stop engine
Press the engine start-stop switch to the " " position, the engine stops.
2
Headlight switch
This switch is located in the light switch. The corresponding
position corresponds to different light modes.
High beam mode " ":Turn on the vehicle high beam mode and
the " " sign on the instrument will be lit.
Low beam mode " " : Turn on the vehicle near-light in the mode
of near-light.