99
MAINTENANCE,STORAGE AND TRANSPORTATION
OIL STRAINER CLEAN
The oil filtration on this engine is a two-stage filtration system.
The oil strainer(pre-filter) is designed to trap large foreign objects.
Replace the oil according to the Maintenance Schedule. Also use
Segway approved oil that is designed for 4-stroke engines.
2
3
4
5
1
1
Bolt M6*25*8
2
Strainer cover
3
O-rings seal
4
Strainer spring
5
Oil strainer
The oil filter can be checked after the oil is discharged. If cleaning
is needed, please take the following steps:
1. Remove 4 bolts with tools.
2. Remove the strainer cover, O-ring seal and strainer spring in
turn.
3. Take out the oil strainer for cleaning.
4. The installation step is opposite to the removal step.
To Next Page
Loading...
