73
OPERATION
BREAK-IN GUIDELINES
The engine needs 10 working hours or a 186 mi (300km)run-in
period.
During run-in:
• Avoid full throttle operation.
• Avoid pressing the accelerator pedal for more than 3/4
stroke.
• Avoid continuous acceleration.
The brake needs a 124 mi (200km) run-in period.
New brakes will not operate at their maximum efficiency until the
run-in period is over. Brake performance may be compromised, so
be careful.
NOTICE
During this period, avoid full-throttle stares, rapid acceleration and
constant rpm operation.
To Next Page
Loading...
