EasyManuals Logo

Segway SGW500F-A7 User Manual

Segway SGW500F-A7
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
135
MAINTENANCE,STORAGE AND TRANSPORTATION
BATTERY CHARGING
NOTICE
When charging, the hydrogen produced by the 12V battery is
combustible explosive gas. Therefore, please follow the following
precautions before charging:
If charging the 12V battery is still installed in the vehicle, be sure to
disconnect the ground cable.
Make sure the power switch on the charger is off when connecting and
disconnecting the charger cable to the 12V battery.
Only charge slowly (5A or less). If charge quickly, the 12V battery may
explode.
Measures to be taken in an emergency
1. Connect the clamp of the positive jumper cable to the special
jumper starting terminal of the vehicle.
2. Connect the clamp on the other end of the positive cable to
the positive (+) terminal of another vehicle.
3. Connect the negative cable clamp to the negative battery
terminal of another vehicle.
4. As shown, connect the clamp on the other end of the negative
cable to a separate clamp
.
5. Place jumper cable terminals firmly on, unpainted metal.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Segway SGW500F-A7 and is the answer not in the manual?

Segway SGW500F-A7 Specifications

General IconGeneral
BrandSegway
ModelSGW500F-A7
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals