88
MAINTENANCE,STORAGE AND TRANSPORTATION
ITEM
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
REMARKS
HOURS
CALENDAR
MILES
（
KM
）
Fuel System 25 H 1 M 200 (320)
Break-in check: cycle key to
pressurize fuel pump; check
lines and ttings for leaks
and abrasion
Engine oil change 25 H 1 M 620 (1000)
Break-in check: oil and lter
change
Front gearcase oil 25 H 1 M 200 (320)
Break-in check: oil level check
Rear gearcase oil 25 H 1 M 200 (320)
Break-in check: oil level check
BREAK-IN MAINTENANCE
PERIODIC MAINTENANCE
ITEM
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
REMARKS
HOURS
CALENDAR
MILES
（
KM
）
► Brake pad wear 10 H Monthly 100 (160)
Inspect periodically;
replace as needed
Battery 20 H Monthly 200 (320) Check terminals; clean; test
►
Air lter, main
element
50H 500 (800)
Inspect; replace as needed;
inspect frequently if
subjected to severe use
►
General
lubrication
50 H 3 M 500 (800)
Lubricate all ttings, pivots,
cables, etc.
Throttle Body
Intake Duct
50 H 6 M 500 (800)
Inspect duct for proper
sealing/air leaks
Drive belt 50 H 6 M 500 (800)
Inspect; adjust; replace as
needed
Cooling system 100 H 12 M
1000 (1600)
Inspect coolant strength
seasonally; pressure test
system yearly
► Engine oil change 100 H 12 M
1000 (1600)
Change the oil and lter
Make sure to perform proper maintenance at recommended
intervals as indicated in the tables. Some items of the maintenance
schedule must be performed in function of the calendar, regardless
of the distance or time of operation.
To Next Page
Loading...
Need help?
General
