Sekonic LITEMASTER PRO L-478 Series - 4) Factory Setting

60
4)FactorySetting
1. Touch the [Factory Setting] in the Hardware
SettingscreentodisplaytheFactorySetting
Conrmationscreen.
2. Touch the [Yes]toproceedfactorysetting
(Touch the [No]iffactorysettingisnot
needed.)
3. Touch the [Yes]intheFinalConrmation
screentocompletethesettingandreturnto
Measuring screen.
(Touch the [No]iffactorysettingisnot
needed and return to Hardware Setting
screen.)
5)UserInformationEditing
1. Touch the [Edit User Info] in the Hardware
Settingscreentodisplaythekeypadtoinput
userinformation.
2. Currentlysetinformation(characters)
appears at the top of screen.
 Upto31characterscanbeentered(See
P13 for details.). Touch the [OK]tocomplete
the input and return to the hardware Setting
screen.
3. Inputuserinformationwillbedisplayedon
theInformationscreen.
FactorySettingConrmation
Screen
FinalConrmationScreen
EditUserInformation
Screen