19
3.1.8 Removal of JR10-614 Release Button Assembly and JR106116 Click board / 3
a) An Optics Assembly / 1 (JR10-616) is removed first.
Remove the 3 screws securing the JR106116 Click board / 2. (ZA378 M1.4×5 3pcs.)
Be careful of loss of a spring / 2 (JC107412).
*ZA378 : The screw tightening torque is to be 3～5cNm (2.9～4.9kgcm)
Cautions during assembly
・ZA378 : The screw tightening torque is to be 3～5cNm (2.9～4.9kgcm)
3.1.9 Other
a) Disassemble other parts while referring to the structural diagram.
ZA378(M1.4×5)
3pcs
JR106116
Click board / 3
JR10-616
Optics Assembly / 1
JC107412
spring / 2
2pcs
JR10-614
Release Button Assembly
To Next Page
Loading...
