Sekonic LITEMASTER PRO - Removal of JR10-611 Optics Main Frame Assembly and JR10-613 Optics Cover; R Assembly

16
3.1.6 Removal of JR10-611 Optics Main Frame Assembly and JR10-613 Optics Cover / R Assembly
a) Remove the screw on Main Frame Cover / R Assembly (JR10-122). (ZA348:M1.7×6 7pcs.)
*Reference. 3.1.1 Removal of JR10-122 Main Frame Cover / R Assembly.
b) Detach all of the lead wires soldered to the round of PCB / 2 Assembly (JR11-902 / JR21-902) using
the soldering iron.
Remove the two screws that hold the PCB / 2 Assembly. (ZA348:M1.7×6 2pcs)
*Reference. 3.1.2 Removal of JR11-902 / JR21-902 PCB / 2 Assembly .
c) Detach all of the lead wires soldered to the round of PCB / 2 Assembly (JR10-901 / JR20-901) using
the soldering iron.(JR109001：Wire Harness / 1, JR109002：Wire Harness / 2, JC109011：Wire
Harness / K)
※Reference. 3.1.3 Removal of JR10-901 / JR20-901 PCB / 1 Assembly.
ZA348（M1.7×6）
7pcs
JR10-122
Main Frame Cover /
R
A
ssembl
y
Battery : 2pcs
JR10-130 Battery cover Assembly
JR109010：Wire Harness / J
Two places
・JR109007：Wire Harness / F
・JR109009：Wire Harness / H
JR11-902
(JR21-902)
PCB / 2 Assembly
ZA348 (M1.7×6)
2pcs
JR11-902
(JR21-902)
JC109011：Wire Harness / K (Brown)
JC109012：Wire Harness / L (Red)
JC109013：Wire Harness / M (Green)
JR10-901
(JR20-901)
PCB / 1 Assembly