39
7. Destination Setting
Required tools: PC, USB cable, battery (Size AAA battery ×2) or Power supply box, dummy battery
7.1 When setting the destination
The destination is set as the U.S. at the time when the circuit boards pass inspection.
Destination
Job number
Language
specification
Radio
Transmitter Module
Specification (only DR)
L-478D L-478DR
Japan JR10 Japanese
Europe JR11 JR21 English CE
U.S. JR12 JR22 English FCC
China JR1G JR2G Chinese CE
For destinations other than the U.S., it is necessary to change the destination according to the following
procedure.
7.2 When setting the destination
1) Turn on the PC with the maintenance tool installed (hereinafter referred to as PC).
2) Log on as necessary.
3) Start the maintenance tool.
Select and click “
(Start)” - “Programs” - “SEKONIC Corporation” – “L-478 Maintenance Tool”.
4) Connect PC and L-478 to update with USB cable, and turn on the L-478.
5) Click the " Set the destination " button.
To Next Page
Loading...
