USER MANUAL
19
Command to quick save and quit (Escape)
Every time you wish to quick store and quit set-up, hold key and
press key . Release both keys after you hear a beep.
i
valid for program and service settings.
Empty batteries are indicated with the
symbol on display. We suggest the
battery replacement every 2 years. ST2
is supplied with two alkaline batteries 1.5
V type AAA. Battery socket is inside the
ST2. To remove thermostat from the wall
plate, do the following. Hold thermostat
in height of keys and pull it towards your-
self (Picture 19 - OPEN). After battery
exchange, put ST2 back on the wall
plate, by doing the following. Hook ST2
on top and push it with bottom towards
the wall plate (Picture 19 - CLOSE).
Picture 19
Battery replacement
Battery exchange should be done within 20 seconds. In other case
you will have to set the accurate time again.
OPEN
CLOSE
To Next Page
Loading...
