Seltron ST2 - Technical Data

56
Model: ............................................ ST2
Operation mode: ............................ P - regulator (ON / OFF),
sliding mode or PI - controller
(3 point control)
Power supply: ................................. 2 batteries LR03, size AAA
Relay output: .................................. 230 V ~ / 6 (3) A
JV module: ..................................... 24 V output
Radio module: ................................ 433.92 MHz, modulation OOK
Consumption: ................................. I= 0,022 mA; P= 0,066 mW
Temp. sensor type: ........................ Murata NTC
Degree of protection: ...................... IP 30 by SIST EN 60529
Safety class: ................................... II by SIST EN 60730-1
Housing: ......................................... ABS thermoplast, white
...................
Weight: ........................................... 150 g
Technical data
TECHNICAL DATA, DECLARATIONS