GB
33
GB
Function
7. Function
In the following chapter the interrelation of the programming of the different receiver
types will be described and some definitions will be explained.
7.1. Basic settings in the commeo Sensor WS/WSRF
The basic setting of the following parameter values can be modified.
Note:
Not every setting is available in every receiver profile.
Basic settings
Wind threshold value 8 m/s (Awning class 2)
Threshold value for sun – extend 25 klx
Threshold value for sun – retract 10 klx
Sun 1, sun 2, sun 3 All activated
Threshold value for twilight 600 lx
Threshold value for darkness 40 lx
Threshold value for frost +4 °C
7.2. Delay times
Often weather conditions may change within a short time. At a fast change of a cloudy
sky to a sunny, cloudless sky an immediate reaction of the automatic would rather feel
restless to the user. That is why delay times are programmed into the automatic switch-
ing times. Therefore a weather change has to be permanently for the entire delay time
so that an automatic command is executed.
7.3. Setting and modification of the sun and wind values
The setting of the values can be made by using the hand-held transmitter. The detailed
description of the hand-held transmitters can be found in the respective operating
instructions of the devices.
To Next Page
Loading...