10C EVO
11
English
3 GETTING STARTED
3.1 Product Details
Camera Button
Antenna
Lens
Field of view: 125 degrees
Aperture: F/2.4
Jog Dial
Status LED
Phone Button
MicroSD Card Slot
Speaker and
Microphone
Port
DC Power
Charging &
Firmware
Upgrade Port
3.2 Powering On and Off
Press the Jog Dial and the Phone Button for 1 second to power on. Tap
the Jog Dial and the Phone Button to power off.
3.3 Charging
The headset can be charged using many common methods via the
supplied USB power & data cable. The LED turns red while the
headset is charging and turns blue when it is fully charged. Depending
upon the charging method, the headset will be fully charged in about
2.5 hours. The headset is compatible with 5 V input USB-charged
devices only.
Note:
Using When Plugged Into a Power Source (USB-charging adapter or
Powerbank)
When you want to record long videos and time lapse events, connect the
10C EVO to a power source and then use it.
• If you connect the 10C EVO to the Powerbank while the camera is on, the
10C EVO will use the electricity stored in the Powerbank but the battery
will not charge.
• If you connect the 10C EVO to the Powerbank while the camera is off, you
can use the 10C EVO while it charges.
To Next Page
Loading...
Need help?
General
