10C EVO
34
15 FIRMWARE UPGRADE
The headset supports rmware upgrades. You can update the rmware
using the Sena Device Manager. Please visit Sena website at
www.sena.com to check the latest software downloads.
16 TROUBLESHOOTING
16.1 Fault Reset
When the headset is not working properly, you can easily reset the
unit:
1. Locate the pinhole reset button at the back of the headset main
unit.
2. Gently insert a paperclip into the hole and tap the Fault Reset
Button with light pressure.
3. The headset will shut down.
Note:
Fault Reset will not restore the headset to factory default settings.
To Next Page
Loading...
