Sena 10C EVO - Camera Configuration: Photo and Video Modes

10C EVO
32
Note:
1. Audio Multitasking will be activated during two-way intercom
conversations with a headset that also supports this feature.
2. When Audio Multitasking is disabled, the background audio source will
return to its independent volume level.
3. For Audio Multitasking to work properly, you need to power the headset
off and on. Please restart the headset.
4. Some GPS devices may not support this feature.
14.2.14 Background Volume (Default: Level 5)
The Background Volume can be adjustable only when the Audio
Multitasking turns on. Level 9 is the highest volume and 0 is the lowest.
14.3 Camera Conguration Setting
You can change the settings of the camera through the Sena Camera
App.
14.3.1 Photo Mode (Default: Single Shot Mode)
You can select the photo mode to be either single shot or burst shot.
Single shot takes a single photo while burst shot takes 8 photos.
14.3.2 Video Mode (Default: Normal Recording Mode)
You can select the video mode to be normal recording mode, timelapse
mode, or loop recording mode. Timelapse mode records series of
photos at timed intervals and makes it into a video. Loop recording
mode constantly records videos at timed intervals, replacing old video
les when memory is full.