EasyManua.ls Logo

Sena 10C EVO - Mobile Phone and GPS Operations; Making and Answering Mobile Phone Calls; Speed Dialing and Redialing

Sena 10C EVO
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10C EVO
19
English
6 MOBILE PHONE, GPS
6.1 Mobile Phone Call Making and Answering
1. To answer a call, tap the Phone Button or the Jog Dial to answer
the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if VOX Phone is enabled, unless you are
connected to intercom.
3. To end a call, tap the Phone Button or press the Jog Dial for 2
seconds until you hear a beep.
4. To reject a call, press the Jog Dial for 2 seconds until you hear a
beep while the phone is ringing.
5. To transfer a call between the mobile phone and the headset
during the phone conversation, press the Phone Button for 2
seconds until you hear a beep.
6. To make a call with voice dialer, Tap the Phone Button in stand-by
mode to activate the voice dialer of your mobile phone.
6.2 Speed Dialing
1. Double tap the Phone Button and you will hear a voice prompt,
“Speed dial”.
2. Rotate the Jog Dial clockwise or counter clockwise to navigate
between the menus. You will hear prompts for each menu item.
3. Tap the Phone Button to select a voice menu among the followings:
(1) Last number redial (4) Speed dial 3
(2) Speed dial 1 (5) Cancel
(3) Speed dial 2
4. After selecting the last number redial menu, “Last number
redial”. Then, to redial the last phone call number, tap the Phone
Button.
5. To call one of the speed dials, rotate the Jog Dial clockwise or
counter clockwise to navigate between the menus until you hear
a voice prompt, “Speed dial (#)”. Then, tap the Phone Button.
6. If you want to exit the speed dial immediately, rotate the Jog
Dial until you hear a voice prompt, “Cancel”, and tap the Phone
Button or the Jog Dial.

Other manuals for Sena 10C EVO

Related product manuals