10C EVO
24
10 GROUP INTERCOM
Group Intercom allows you to instantly create a multi-way conference
intercom with three other most recently paired headsets.
1. Go through intercom pairing with up to three headsets you want to
have Group Intercom with.
2. Press the Jog Dial for 3 seconds to begin Group Intercom. The
LED will ash green.
3. To terminate Group Intercom, press the Jog Dial for 3 seconds
during Group Intercom.
11 UNIVERSAL INTERCOM
Universal Intercom allows you to have intercom conversations with
users of non-Sena Bluetooth headsets. Non-Sena Bluetooth headsets
can be connected to the Sena Bluetooth headset if they support the
Bluetooth Hands-Free Prole (HFP). You can pair the headset with only
one non-Sena headset at a time. The intercom distance depends on
the performance of the Bluetooth headset to which it’s connected.
When a non-Sena Bluetooth headset is paired with the headset, if
another Bluetooth device is paired via Second Mobile Phone Pairing,
it will be disconnected.
1. Press and hold the Jog Dial for 10 seconds to enter the headset
conguration menu. Rotate the Jog Dial until you hear a voice
prompt, “Universal intercom pairing”. Tap the Phone Button
to enter into Universal Intercom Pairing mode and you will hear
multiple beeps.
2. Put the non-Sena Bluetooth headset in Pairing Mode. The headset
will automatically pair with a non-Sena Bluetooth headset.
To Next Page
Loading...
Need help?
General
