Sena 10C EVO - Pairing Second Phone, GPS, or SR10; Advanced Selective Pairing Profiles

10C EVO
17
English
5.2 Second Mobile Phone Pairing - Second Mobile
Phone, GPS, and SR10
1. Press and hold the Jog Dial for 5 seconds and you will hear a
voice prompt, “Intercom pairing”.
2. Within 2 seconds, tap the Phone Button again and you will hear a
voice prompt, “Second mobile phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
Sena 10C EVO in the list of the devices detected on the mobile
phone.
4. If your mobile phone asks for a PIN, enter 0000.
5.3 Advanced Selective Pairing: A2DP Stereo or
Handsfree
Phone Pairing allows the headset to establish two Bluetooth proles:
Hands-Free or A2DP Stereo. Advanced Selective Pairing allows the
headset to separate the proles to enable connection with two devices.
5.3.1 A2DP Stereo Music Only
1. Press the Phone Button for 5 seconds until the LED ashes red
and blue alternately and you hear multiple beeps.
2. Within 2 seconds, tap the Jog Dial again and you will hear a voice
prompt, “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
Sena 10C EVO in the list of devices detected on your phone.
4. If your mobile phone asks for a PIN, enter 0000.
5.3.2 HFP for Phone Call Only
1. Press the Phone Button for 5 seconds until the LED ashes red
and blue alternately and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again and you will hear a
voice prompt, “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the
Sena 10C EVO in the list of devices detected on your phone.
4. If your mobile phone asks for a PIN, enter 0000.