Sena 10C EVO User Manual

10C EVO
20
6.3 GPS Navigation
6.3.1 GPS Pairing
1. Press and hold the Jog Dial for 5 seconds until you will hear a
voice prompt saying “Intercom pairing”.
2. Within 2 seconds, double tap the Phone Button and you will hear
the voice prompt saying “GPS pairing”.
3. Search for Bluetooth devices on the GPS navigation. Select the
Sena 10C EVO in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN.
Note:
When Audio Multitasking is enabled, if you pair your GPS device via GPS
Pairing, its instructions will not interrupt your intercom conversations, but
will overlay with them.
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
1. To play or pause music, press and hold the Jog Dial for 1 second
until you hear a double beep.
2. To adjust the volume, rotate the Jog Dial.
3. To track forward or track back, rotate while pressing the Jog Dial
clockwise or counter clockwise.

Sena 10C EVO Specifications

General

Bluetooth Version	Bluetooth 4.1
Certificates	CE, FCC, IC
Bluetooth Profile	HFP, HSP, A2DP, AVRCP
FM Radio	Yes
Video Recording	1080p
Video Recording Time	2 hours
External Memory	MicroSD card
Microphone	Built-in
Speaker	Built-in
Audio	Noise Control