10C EVO
26
4. To save the current station, tap the Jog Dial again. You will then
hear a voice prompt, “Save preset (#)”.
5. To delete the saved station in the preset number, tap the Phone
Button. You will then hear a voice prompt “Delete preset (#)”.
12.4 Scan and Save
1. Double tap the Phone Button.
2. The Sena tuner pauses at each station it nds for 8 seconds
before moving to the next.
3. To save a station while scanning frequencies, tap the Phone
Button when at that station. You will hear a voice prompt, “Save
preset (#)”. The station will be saved as the next preset number.
12.5 Temporary Preset
The temporary station preset feature automatically nds and saves the
nearest 10 radio stations without changing your existing preset
stations.
1. Tap the Phone Button 3 times to automatically scan for 10
temporary preset stations.
2. The temporary preset stations will be cleared when the headset
is powered off.
12.6 FM Sharing
You can listen to the radio during the intercom conversation. To start
FM sharing, press and hold the Phone Button for 1 second during the
intercom conversation. During FM sharing, you can move to the next
preset station and you or your friend on the intercom can change
frequencies. If either person changes the frequency, the other will
listen to the same frequency. To terminate FM sharing, press and hold
the Phone Button for 1 second or end the intercom call.
Note:
1. FM sharing will be terminated if the headset starts a multi-way intercom
conference.
2. When Audio Multitasking is enabled, if an intercom call is made while you
are listening to the FM radio, FM sharing will not work.
3. FM sharing is only supported between Sena headsets that currently
support this feature.
To Next Page
Loading...
Need help?
General
