Sena 10U - Handlebar Remote Installation

10U
20
Note:
To enhance the audio quality, you can make use of the foam speaker covers.
Cover each speaker with the foam and attach the hook fastener at the back
of the speaker. Then place the speakers in the helmet as described above.
Foam covered speakers work most effectively when they are slightly touching
your ears.
Hook Fastener
Foam Speaker Cover
3.4 Handlebar Remote
1. Gently spread the two ends of the Handlebar Remote.
2. Clip it on the left handlebar of your motorcycle. Make sure you can
comfortably control the Joystick with your left thumb.
200
220
180
160
140
120
100
80
60
40
20
1
240
260
Note:
If the handlebar requires better grip for holding the Handlebar Remote in place,
apply a single or double rubber band around the handlebar.