Sena 10U - Voice Activated Intercom; Voice Prompts Control

10U
48
13.4 Enabling/Disabling Voice Activated Intercom
Voice Prompt
“VOX intercom”
Factory Default Disable
Enable Tap the Rear Button
Disable Tap the Front Button
If this feature is enabled, you can initiate an intercom conversation with the
last connected intercom friend by voice. When you want to start intercom,
say a word such as “Hello” loudly or blow air into the microphone. If
you start an intercom conversation by voice, the intercom terminates
automatically when you and your intercom friend remain silent for 20
seconds. However, if you manually start an intercom conversation by
tapping the Front Button, you have to terminate the intercom conversation
manually.
However, if you start intercom by voice and end it manually by tapping the
Front Button, you will not be able to start intercom by voice temporarily.
In this case, you have to tap the Front Button to restart the intercom. This
is to prevent repeated unintentional intercom connections by strong wind
noise. After rebooting the 10U, you can start intercom by voice again.
13.5 Enabling/Disabling Voice Prompts
Voice Prompt
“Voice prompt”
Factory Default Enable
Enable Tap the Rear Button
Disable Tap the Front Button
You can disable voice prompts by conguration setting, but the following
voice prompts are always on.
– Voice prompts for conguration setting menu
– Voice prompts for battery level indicator
– Voice prompts for factory reset
– Voice prompts for speed dial
– Voice prompts for FM radio functions