Sena 10U - Stereo Music Functions; Bluetooth Stereo Music Playback; Music Sharing

10U
31
English
7 STEREO MUSIC
7.1 Bluetooth Stereo Music
The Bluetooth audio device must be paired with the 10U by following the
“Bluetooth Stereo Device Pairing” procedures described in the section
7.1. The 10U supports the Audio/Video Remote Control Prole (AVRCP),
so if your Bluetooth audio device also supports the AVRCP, you can use
the 10U to remotely control music playback. Not only can you adjust the
volume but you can also use functions such as play, pause, next track
and previous track.
1. To play or pause music, press the Joystick for 1 second until you hear
a double beep.
2. To adjust the volume, move the Joystick up or down
3. To track forward or track back, move and hold the Joystick for 1
second left or right.
7.2 Music Sharing
You can start sharing music with an intercom friend using Bluetooth stereo
music during a two-way intercom conversation (please refer to section
8.1, “Two-way Intercom”). When you terminate music sharing, you can go
back to the intercom conversation. To start or terminate sharing music,
press the Joystick for 1 second during an intercom conversation until you
hear a double beep. To track forward or track back, move the Joystick left
or right for 1 second.
Note:
1. Both you and your intercom friend can remotely control music playback
such as track forward and track back.
2. Music sharing will be paused when you are using your mobile phone or
listening to GPS instructions.
Function Handlebar Remote Headset
Play Music Press the Joystick for 1 second
Press the (+) Button for
1 second
Pause Music Press the Joystick for 1 second
Press the (+) Button for
1 second
Track Forward
Move the Joystick right for
1 second
Press the (+) Button for
2 seconds
Track Back Move the Joystick left for 1 second N/A
Button Operation Table for Music Control