Sena 10U - Volume Adjustment; Sena Software Information

10U
23
English
4.4.2 Voice Prompt Indicator
When you power on the headset, keep pressing the (+) Button and the
(−) Button simultaneously for about 3 seconds until you hear three, high
toned beeps. Then you will hear a voice prompt indicating the battery
level. However, if you release the buttons as soon as the headset turns on,
you will not hear the voice prompt for the battery level indication.
4.5 Volume Adjustment
You can easily adjust the volume by moving the Joystick up or down.
You will hear a beep when the volume reaches the maximum or minimum
level. The volume is set and maintained independently at different levels
for each audio source even when you reboot the headset. For example,
once you set the volume for mobile phone handsfree, it will not change
even if you adjust the volume for your Bluetooth MP3 music. However, if
you adjust the volume during stand-by mode, it will affect volume levels
of every audio source.
Function Handlebar Remote Headset
Volume up Move the Joystick up
Tap the (+) Button
Volume down Move the Joystick down Tap the (–) Button
Button Operation Table for Volume Adjustment
4.6 Sena Softwares
4.6.1 Sena Device Manager
The Sena Device Manager allows you to upgrade the rmware and
congure the device settings directly from your PC. Using this software,
you can assign speed dial presets, FM radio frequency presets and
more. It is available for both Windows and Mac. For more information on
downloading the Device Manager, please visit www.sena.com.
4.6.2 Sena Smartphone App
The Sena Smartphone App allows you to congure device settings and
view the User’s Guide and the Quick Start Guide. Pair your phone with
your 10U headset (please refer to section 5.1 “Mobile Phone Pairing
Mobile Phone, Bluetooth Stereo Device”). Run the Sena Smartphone App
and you can congure its settings directly from your smartphone. You can
download the Sena Smartphone App for Android or iPhone from www.
sena.com/app.