Sena 10U - Universal Intercom Functionality; Universal Intercom Pairing

10U
37
English
10 UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non-Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they support
the Bluetooth Hands-Free Prole (HFP). The working distance may differ
depending on the performance of Bluetooth headset that it is connected
to. In general, it is shorter than normal intercom distance since it uses
the Bluetooth Hands-Free Prole. The Universal Intercom affects both
the phone call connection and the multipoint connection (mostly used
for GPS connections for riders). You cannot use a multipoint connection
device while you are using the Universal Intercom in case as below.
1. If a non-Sena headset does not support a multipoint connection,
it cannot use a phone call connection while using the Universal
Intercom.
2. As for Sena headsets, the Universal Intercom affects the multipoint
connection.
3. If non-Sena headset (already paired as Universal Intercom with Sena) is
turned on, then the multipoint connection is automatically deactivated.
And the non-Sena headset is automatically connected to Sena headset
as a Universal Intercom. So you cannot use multipoint connection device
such as GPS, while a non-Sena headset is turned on.
4. Even though you disconnect the non-Sena headset as a Universal
Intercom, it will not automatically restore the multipoint connection.
To restore the multipoint connection, you should turn off the non-Sena
headset rst, then try to connect to multipoint device manually from
the device screen or simply reboot the device so that it automatically
connects to the Sena headset.
10.1 Universal Intercom Pairing
The 10U can be paired with non-Sena Bluetooth headsets for Bluetooth
intercom conversation. You can pair the 10U with only one non-Sena
Bluetooth headset so if you pair with a different non-Sena Bluetooth
headset, the previous pairing will be removed.
1. Turn on the 10U and a non-Sena Bluetooth headset that you want to
pair with.
2. Press the Front Button for 12 seconds to enter the conguration
menu. Move the Joystick up or down until you hear a voice prompt
saying, “Universal intercom pairing”. Tap the Rear Button to enter
into Universal Intercom Pairing mode and the blue LED will ash
rapidly and you will hear multiple beeps. Please refer to section
13.11, “Universal Intercom Pairing” for more details.