10U
38
3. Perform the operation required for handsfree pairing on the non-Sena
Bluetooth headset (refer to the User’s Guide of the headsets you
want to use). The 10U will automatically pair with non-Sena Bluetooth
headsets in pairing mode.
10.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as you
would between other Sena headsets. You may single tap the Front Button
to begin an intercom conversation with the rst intercom friend, double
tap with the second intercom friend, and triple tap with the third intercom
friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, by activating the voice dialer or using the redialing operation.
You may also disconnect the existing connection by ending a call
operation function (refer to the User’s Guide of the headsets for voice
dialer, redialing, and ending a call).
10.3 Three-way Universal Intercom
You may make a three-way Universal Intercom connection with two 10Us
and one non-Sena Bluetooth headset. If the intercom connection is made,
all headsets connected cannot use the mobile phone call function since
the connection between the headset and the phone is disconnected
temporarily. If you disconnect the intercom call, the mobile phone
connection is made again automatically so that you can use a mobile
phone call function.
1. You (A) need to be paired with a non-Sena Bluetooth headset (B) and
another 10U headset (C) for the three-way conference intercom.
(A)
(B) (C)
Pairing
Pairing
To Next Page
Loading...
