10U
52
14 FIRMWARE UPGRADE
The 10U supports rmware upgrades. You can update the rmware using
the Sena Device Manager (please refer to section 4.6.1, “Sena Device
Manager”). Please visit Sena Bluetooth website at www.sena.com to
check the latest software downloads.
15 TROUBLESHOOTING
15.1 Intercom Failure
When you try to start an intercom conversation with an intercom friend
who is unavailable within range or already having a conference intercom
with other riders or a mobile phone call, you will hear a low tone double
beep signifying an intercom busy signal. In this case, you have to try
again later.
15.2 Intercom Reconnection
If your intercom friend goes out of range while having an intercom
conversation, you may hear static noise and eventually the intercom will
be disconnected. In this case, the 10U automatically tries to reconnect the
intercom every 8 seconds and you will hear high tone double beeps until
the intercom is reestablished. If you do not want to make a reconnection,
tap the Front Button to stop the attempt.
To Next Page
Loading...
