OmniHub CMP201– User Manual
Page 86 of 103
Webpage Configuration
1. The webpage for the Monroe box requires login. The Monroe box has been configured
with this login information (The capital “A” in the username is required):
User: Admin
Password: sencore12
2. Once logged into the unit, browse to the Setup tab and select Net Alerts.
3. Configure the DVS644 (SCTE18) settings in the Monroe exactly like are shown in this
document. Enable Alert Forwarding and Encoder Originated Alerts to be sent to
DVS644/SCTE18 devices.
Setup Page (Monroe R189SE)
4. A DVS644(SCTE-18) CEAM Client Connection should already be configured. If not,
click the Add DVS644(SCTE18) Client Interface button.
To Next Page
Loading...
