OmniHub CMP203– User Manual
Page 38 of 109
3.3.4 CR2-DVBS2FTA-00/00A
CR2-DVBS2FTA-00/00A is a 4/8-channel DVB-S/S2 receiving module with 4/8 RF
connectors, it supports internal signal pass through from one tuner to the others.
CR2-DVBS2FTA have a similar Status interface with CR2-DVBS2CI. With these 2
modules. The only difference is the number of received satellite signal (4/8 Satellite) and
DVBS2CI can decrypt services using CAM module and Smart Card where the DVBS2FTA
can use BISS decryption.
The parameters for each port in Module Settings are also same with the CR2-DVBS2CI
and Service Configuration is same with CR2-DVBC-00. Please refer to page 34 to 36 for
the configuration manual.
3.3.5 CR2-8VSB-00
CR2-8VSB-00 is a 4-channel 8VSB receiving module with 4 RF connectors. Picture
below shows front plate of 8VSB module.
Module specification:
- 4 RF female connectors
- Frequency range: 50 – 860MHz
- Bandwidth: 6MHz
- Modulation: 8VSB
- Signal Level: -80dBm ~ -20dBm
To Next Page
Loading...