OmniHub CMP203– User Manual
Page 78 of 109
3.3.15.3 Service Configuration
Service Configuration for QAMB are very simply compared to QAMA. Here, you just
have to edit the Original network ID and TSID to the correct label you want to. You can
also edit the Service parameter like Service ID, Name, Provider, PID, etc.,
System operation of CM2-QAMB are same with other modules.
3.3.16 CM2-QAMB-R01/R01A
CM2-QAMB-R01 is a 4 channel QAM B Modulator module while CM2-QAMB-R01A is
an 8 channel QAM B modulator. The Status, Setting Service Configuration and System
Operation for these two modules are same with the CM2-QAM-00/R00.
3.3.17 CM2-8VSB-R01/R01A
CM2-8VSB-R01A module supports up to 4/8 adjacent frequencies modulating with 1 RF
connector for output.
Please see QAM configuration at page 69 to 72 for reference
3.3.17.1 Settings
To Next Page
Loading...