OmniHub CMP203– User Manual
Page 82 of 109
• Click plus icon of Descriptor and add the LCN Descriptor in. Then check all the
programs which are contained in this frequency. Then set programs LCN.
• Do same operations to add next TS (frequency) until NIT streams of all the
frequencies have been included. At last click Apply button to let all configuration
take effect. Then searching programs in your STB, you will get all programs in
order of LCN which you set.
Function Modules
3.3.20 CP2-EAS-00
The CP2-EAS-00 module provides the ability to interrupt Encoder playback and
switch to an external transport stream. This feature is for the US market and
requires the CMP chassis to be set for ATSC standard.
Common applications are Emergency Alert Systems for Broadcast applications.
Hospitality installations will use this feature for Audio Muting and Slate images.
To Next Page
Loading...