OmniHub CMP203– User Manual
Page 23 of 109
3.2.3 IP Input
This menu allows the user to configure and access the IP input:
• Status
• Settings
• Service Configuration
Clicking on the “IP Input” gear allows to go into page where user can access Status,
Setting, Batch Setting and Service Configuration tabs. There are total of 120 Channel
input on the CMP203 Baseboard
Status tab shows Total Bitrate, Effective Bitrate, TS Analysis and Service List for each
IP input stream.
Clicking on the icon button under Service List will display information on the
services included in the transport stream.
To Next Page
Loading...