Sencore OmniHub CMP203 - Page 58

OmniHub CMP203– User Manual
Page 58 of 109
3.3.9.2 Module Settings
In module Setting, there are Basic and Advance Parameters.
In basic Parameters, here you can edit or modify the parameter in Video (resolution, GO
P, etc.), audio (bitrate, volume, etc.) and Service parameters (PID of Video, audio, PMT
etc.)
Click All Configurable Parameters to see all parameters you can modify and check what
specific parameters you want to set and see. Click the Apply button in the right side to
make the changes take effect.