SP395 SoundPro Audio Integrator Form7492 Operation Manual
13
Firmware Add-on Test Functions
The Audio Integrator comes standard with a solid core of audio analyzing tests. These tests are
fundamental to most audio and acoustic analysis work. The core tests are referred to as the
SP395’s “SoundCore” measurements.
The Audio Integrator contains, in its internal operating software or firmware, instructions for
performing many more audio and acoustic tests than provided by the standard “SoundCore”
measurements. These additional tests may be purchased based upon individual user and company
requirements. The additional available tests are divided into packages or “Firmware Modules”
for easy implementation or purchase.
Firmware Module Function Menu
TechBench Amplitude Sweep TechBench
TechBench Distortion Meter TechBench
TechBench Phase Meter TechBench
TechBench Crosstalk TechBench
TechBench Audio Scope Utilities
TechBench Impedance Sweep Speaker
Noise Curves NCB, RC, PNC Noise Tools
Noise Curves Transmission Loss
(RW, STC, OITC)
Noise Tools
Speech Intelligibility ALCONS, RASTI,STI-PA Noise Tools
Time Delay Analysis TDA TDA
Audio Stethoscope Audio Stethoscope Noise Tools
Multi-Band Decay RT60 Multi-Band Decay Acoustics
The optional functions are available for use upon purchasing the firmware module and entering
the supplied unlock code. The functions contained within a single firmware module may appear
on more than one menu. The table lists the firmware modules and the functions they contain,
along with the Audio Integrator menu that the function appears in.
To purchase an unlock code for a firmware module, contact Sencore. For instructions on how to
unlock a firmware module, see the Setup & Calibration section of this manual.
Specifications, accessories and software add-on test functions are subject to change without
notice.
To Next Page
Loading...
