SP395 SoundPro Audio Integrator Form7492 Operation Manual
97
Save Settings
The Audio Integrator stores its current setup with a “Save Settings” function. This function is
used to save a snapshot of all the current Audio Integrator settings to non-volatile memory. Once
saved, all the current settings are recalled on the next and subsequent times that the power is
turned on.
Fields saved include: All Toolbar settings, including phantom power on/off, input gain, auto-
ranging, monitor section settings, and the generator settings; most function parameters, including
filter selections and modes. Anytime you want to update the saved settings, run this function
again.
How to save current settings
• Select the Utilities menu. Highlight the Save Settings “NO” function.
• Set Save Settings to Y. Change the N to a Y.
• Exit to menu. Click the back arrow to exit the function. The settings will be saved in non-volatile
memory and will be restored the next time that you turn on the SP395.
Settings
<
Save Settings? NO
Setting
The Save Settings function stores your favorite unit setup.
To Next Page
Loading...
