Sensor SMT-200 - Page 7

Io
SENSOR
Table of contents
SMT-200 Operations and Technical Manual 2.00/R1
vii
SECTION 3 DOCKING STATION & PC SOFTWARE OPERATIONS 35
3.1 Docking Station overview 37
3.2 Docking Station interconnection 37
3.2.1 Battery Charging 38
3.2.2 PC Interface 38
3.3 Docking Station PC software introduction 39
3.4 Software installation 39
3.5 Windows installation 39
3.5.1 Windows un-install 40
3.6 DOS installation 40
3.6.1 DOS un-install 40
3.7 Running the program 41
3.7.1 SMT-200DS menu 42
3.7.2 File menu 42
3.7.3 SMT-200 menu 42
3.8 Data Exchange 43
3.8.1 Instructions for File Transfer 43
3.8.2 Explanation of Data transfer sequence: 43
3.8.3 The SMT-200 During File Transfer 44
3.8.4 Failing Transfers 44
3.9 System Update 45
3.9.1 Instructions for System Update 45
3.9.2 Failing System Updates 45
3.10 The SMT-200 Geophone Specifications File 45
SECTION 4 RFID TAG READER 47
4.1 RFID Tag reader introduction 49
4.2 Principles of the RFID Tag reader 49
4.3 Working with the RFID Tag reader 50
4.3.1 Read tags 50
4.3.2 Test the strings 51
4.3.3 Transfer data file 52
4.4 Sorting the tag list 53
4.4.1 Download the tag list to the PC 53
4.4.2 Upload the tag list to the SMT-200 53
4.4.3 View the tag list on the SMT-200 55
4.4.4 View the tag list on the PC 55
4.5 Settings 57
4.5.1 COM settings 57
4.5.2 Autonumber 57
4.5.3 Tag menu visible 57
4.6 Internal storage 58
SECTION 5 GEOPHONE TESTING 59
5.1 Preparing the SMT-200 for use 61
5.2 Testing a string 63
5.3 Downloading data to a PC 64
5.3.1 Data File Test codes 65
5.3.2 Data File Reject codes 65
5.4 Basic Geophone Troubleshooting using the continuous impedance test 66
5.5 Isolation Table 69