Sentec SDM - Default Chapter; Table of Contents

Contents
SenTec Digital Monitoring System i
Contents
Contents i
Figures ii
Tables ii
Abbreviations ii
1 INTRODUCTION 1
1.1 Related Documents 2
1.2 Safety Information 4
2 THE SENTEC DIGITAL MONITORING SYSTEM (SDMS) 11
2.1 Components 11
2.2 The SenTec Digital Monitor (SDM) 12
3 MAINTENANCE/SAFETY & FUNCTIONALITY TESTS 14
3.1 SenTec TC Sensors 15
3.2 SenTec Digital Monitor 30
3.3 Docking Station 41
3.4 Digital Sensor Adapter Cable 42
3.5 Opening the Membrane Changer 43
4 TROUBLESHOOTING 44
4.1 How to use the troubleshooting list 44
4.2 Troubleshooting List 46
5 REPAIRS OF THE SDM 73
5.1 Prior to Repair 74
5.2 Replacement, Tip-up Foot 74
5.3 Replacement, Silicon Foot 75
5.4 Replacement, main fuses 75
5.5 Replacement, Docking Station Door 76
5.6 Replacement, Docking Station Gasket 77
6 SOFTWARE UPDATES 79
7 DISPOSAL 80
7.1 SenTec Digital Monitor 80
7.2 Cables 80
7.3 SenTec TC Sensors 80
7.4 Service Gas Bottle 80
7.5 Consumables 80
8 APPENDIX 81
8.1 Protocol for Safety & Functionality Test 81
8.2 Testing Accessories and Spare Parts 81
8.3 Repair or Investigation Request Form 81
8.4 Repair Reporting Form 81
8.5 Customer Feedback Form 81
8.6 Instructions for Shipment 81
8.7 Certificate for Disinfection 81
8.8 SDMS Maintenance Checklist 82
8.9 Interfaces - Pin Assignement 82
8.10 Technical Specifications 86
8.11 Contact 86