6 Software Updates
The field-upgradable software of the SDM consists of two items:
1. SMBC – Controller Board software (User Interface, Memory and Interface
management)
2. MPB – Multiparameterboard software (Signal Analysis Algorithm)
The SMBC and MPB software can be updated by trained and authorized personnel by
flashing a new version in the flash memory of the existing boards (note: detailed
instructions are included in separate documents).
WARNING: Software updates of the SDM must be carried out
by trained and authorized personnel. Software updates must be
reported to SenTec by using the Repair Reporting Form,
see
section 8 “Appendix”
, to ensure traceability.
To Next Page
Loading...
