7 Disposal
The SDMS is constructed with environment-friendly material. It contains electronic
printed circuit boards, a display, cables and lithium batteries.
Do not incinerate equipment or gas bottles.
WEEE Disposal: European consumers are obliged by law to dispose Waste Electrical
and Electronic Equipment (WEEE) according to the WEEE Directive:
1. All electrical and electronic waste, must be stored, collected, treated, recycled
and disposed of separately from other waste
2. Consumers are obliged by law to return electrical and electronic devices at the
end of their service lives to the public collection points set up for this purpose
or point of sale. Details to this are defined by the national law of the respective
country.
Note: By recycling materials or other forms of utilizing old devices, you are making an
important contribution to protecting our environment.
7.1 SenTec Digital Monitor
Return the SDM to your local SenTec representative or dispose it according to local
regulations.
7.2 Cables
Dispose the cables according to local regulations. The copper contained can be
recycled.
7.3 SenTec TC Sensors
Return the SenTec TC Sensors to your local distributor.
7.4 Service Gas Bottle
Dispose the gas bottles according to local regulations. Make sure that only empty gas
bottles are disposed.
WARNING: Pressurized container. Protect from sunlight and do
not expose to temperatures exceeding 50°C (122°F). Do not
pierce or burn, even after use. Do not spray on a naked flame
or any incandescent material.
To Next Page
Loading...
