SERVOPRO NOx Analyzers Page
AUTO RANGE ON/OFF
→
→
→
or
→
From the Range Setup menu press to access the Auto Range On/Off screen. The
current Auto Range status appears in the upper-right corner of the screen.
Press to turn Auto Range On. This function allows the analyzer to automatically
change ranges without the presence of an operator.
Press to turn Auto Range Off. When Auto Range is Off, the operator will need to
manually change the ranges. The Range Setup menu shows the current status on the right
side of the screen after the (…). Example: AutoRange On/Off … Off.
AUTORANGE SWITCH POINTS
NOTE: The Auto Range Function allows the analyzer to automatically switch up and
down between ranges at predetermined concentrations.
To Next Page
Loading...
