14
Service
Bus diagnostics with MOVITOOLS MotionStudio
Manual – EtherCAT
®
Interfaces, Field Distributors
116
3. Right-click on the communications unit and select the "Parameter tree" menu item.
Select the "09 Bus diagnostics" menu from the parameter tree.
9361315467
14.2.2 Fieldbus interfaces error table
Error code/
Designation
Response Cause Measure
25 EEPROM Rapid stop of
MOVIMOT
®
drive
DO = 0
Error while accessing
EEPROM
• Perform reset and set para-
meters again (NOTICE: sig-
natures will be lost)
• If the fault occurs again, con-
tact SEW Service.
25809148/EN – 01/2019
To Next Page
Loading...
