SEW-Eurodrive MFE Series - Page 16

4
Device structure
Type designation EtherCAT® interfaces
Manual – EtherCAT
®
Interfaces, Field Distributors
16
The MF../Z.1 fieldbus interface does not have a general nameplate.
01
Only field distributors marked with the FS logo for functional safety may be installed in
safety applications. For field distributors marked with the FS logo, the safety function
must be described in the documentation.
4.2.2 Type designation
MFE Fieldbus interface
MFP.. = PROFIBUS
MQP.. = PROFIBUS with integrated minicontroller
MFE.. = PROFINET IO, EtherNet/IP™ or EtherCAT
®
MFD.. = DeviceNet™
MQD.. = DeviceNet™ with integrated minicontroller
72 Connections
21 = 4×I, 2 x O (connection via terminals)
22 = 4×I, 2 x O (connection via plug connector + terminals)
32 = 6×I (connection via plug connector + terminals)
52 = 4×I, 2×I/O (connection via plug connector + terminals) for
PROFINET IO
62 = 4×I, 2×I/O (connection via plug connector + terminals) for
EtherNet/IP™
72 = 4×I, 2×I/O (connection via plug connector + terminals) for
EtherCAT
®
A Design
/
Z21 Connection module
Z21 = for PROFIBUS, PROFINETIO, EtherNet/IP™
and EtherCAT
®
Z31 = for DeviceNet™
D Design
25809148/EN – 01/2019