SEW DHE41B - Project Planning and Startup; Configuration with MOVITOOLS MotionStudio

52
Manual – MOVI-PLC® advanced DHE41B/DHF41B/DHR41B Controller
5
Configuration with the MOVITOOLS® MotionStudio PC software
Project Planning and Startup
5 Project Planning and Startup
This section provides information on project planning and startup
• For the MOVI-PLC
®
advanced DH.41B controller
• For inverters controlled through the MOVI-PLC
®
advanced DH..1B controller
• For the PROFIBUS DP master
5.1 Configuration with the MOVITOOLS
®
MotionStudio PC software
Project selection • Start the MOVITOOLS
®
MotionStudio software.
• To create a new project, select the option [New project] [1].
• To open an existing project, select the option [Open project] [2].
58335AXX
Figure 11: MOVITOOLS
®
MotionStudio start window
[1] Option [New project]
[2] Option [Open project]
[1]
[2]
00
I