SEW DHE41B - Safety Notes; Safety Functions

Manual – MOVI-PLC® advanced DHE41B/DHF41B/DHR41B Controller
7
2
Other applicable documentation
Safety Notes
2 Safety Notes
2.1 Other applicable documentation
• Only specialists are allowed to perform installation and startup observing relevant ac-
cident prevention regulations and the MOVIDRIVE
®
MDX60B/61B, MOVITRAC
®
B
or MOVIAXIS
®
operating instructions!
• Read through this manual carefully before you commence installation and startup of
the DH.41B option.
• As a prerequisite to fault-free operation and fulfillment of warranty claims, you must
adhere to the information in the documentation.
2.2 Safety functions
The MOVIDRIVE
®
MDX60B/61B drive inverters may not perform safety functions with-
out higher-level safety systems. Use higher-level safety systems to ensure protection of
equipment and personnel. For safety applications, ensure that the information in the fol-
lowing publications is observed: "Safe Disconnection for MOVIDRIVE
®
MDX60B/61B".
2.3 Hoist applications
MOVIDRIVE
®
MDX60B/61B, MOVITRAC
®
B and MOVIAXIS
®
are not designed for use
as a safety device in hoist applications.
Use monitoring systems or mechanical protection devices as safety features to avoid
possible damage to property or injury to people.
2.4 Disposal
Observe current national regulations.
Dispose of the following materials separately in accordance with the country-specific
regulations in force, as:
• Electronics scrap
• Plastics
• Sheet metal
• Copper