8-5
CHAPTER8
KEY OPERATOR PROGRAMS
Category Program Name Function Page No.
Date Format Sets the initial date format. 8-20
Setting
Date and Time Adjusts the date and time. 8-21
Adjustment
Rotation Copy Enables/disables rotation of original images. 8-21
Setting
Size Setting for Sets a paper size in each tray with [EXTRA] setting. 8-22
[EXTRA]
Heavy Paper on Enables/disables selection of paper type placed in 8-22
the Bypass Tray the bypass tray.
Specified Paper Tray Sets a paper tray selection method for tandem 8-23
Selection in Tandem copying.
Mode
Timer Settings Auto Power Sets a time interval after which the copier 8-24
Shut-off Timer automatically turns off.
Auto Clear Setting Sets a time interval after which the copier returns 8-24
to the initial settings.
Preheat Mode Sets the time that elapses before the copier enters 8-25
Setting the preheat mode after copying is completed.
Noise Level Sets the time that elapses before the copier enters the 8-25
Reduce Mode noise level reduce mode after copying is completed.
Message Time Sets the length of time that messages are displayed. 8-26
Setting
Enable/Disable Disabling of Auto Prevents automatic paper selection. To disable auto 8-27
Settings Paper Selection paper selection from the bypass tray, see page 8-29,
Prohibit Auto Paper Selection from the Bypass-Tray.
Disabling of Auto Prevents automatic switching between the paper 8-27
Tray Switching trays.
Disabling of Prohibits the use of the bypass tray during 8-27
Bypass-Tray duplex copying.
in Duplex Copy
Disabling Prevents stored programs from being replaced or 8-28
Deletion of Job deleted.
Programs
Disabling of Prevents the use of the document feeder when it 8-28
Document Feeder malfunctions.
KEY OPERATOR’S GUIDE
Key operator programs
To Next Page
Loading...
