Sharp MX-M950

79
Sending an image in fax mode
The following example explains how to set the resolution to [Fine] and [Half Tone] when sending an original with
small text.
1 Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2 Enter the fax number of the receiving fax
machine.
3 Select settings in the touch panel.
(1) Make sure that the desired mode ([Fax] tab) is
selected.
(2) Touch the [Resolution] key.
(3) Touch the [Fine] key.
The resolution increases (producing a clearer image) in
the following order: [Standard], [Fine], [Super Fine],
[Ultra Fine].
(4) Touch the [Half Tone] key.
Select [Half Tone] for a photo or illustration with
shading to further improve the image.
[Half Tone] cannot be selected when [Standard] is
selected.
(5) Touch the [OK] key.
4 Press the [START] key.
The side to be scanned
must be face up!
Auto
Auto
Auto
Data Entry
FaxScan
Standard
Auto Reception
Fax Memory:100%
Internet Fax USB Mem. Scan
Scan: Send:
A4
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
Special Modes
Resolution
Exposure
Original
Fax/Resolution
OK
Standard
Super Fine Half Tone
Fine
Ultra Fine
(2)
(3)
(4)
(5)
(1)
Cancel scanningCorrect a mistake
Downloaded From ManualsPrinter.com Manuals